How to Survive a DOT Inspection

How to Survive a DOT Roadside Inspection

Getting pulled over for a roadside DOT inspection can be nerve-wracking. The biggest single key to surviving a roadside DOT inspection is a good attitude. Be cooperative, patient, and positive. Understand that the officer is just doing his job. Own your mistakes and agree to resolve any issues as soon as possible. Being defensive, argumentative, or combative will only make matters worse and possibly prompt an even longer delay or more rigorous inspection. Just sit tight, endure, and know that every driver eventually gets pulled over.

Here are a few tips to help you or your drivers sail through the next roadside DOT inspection.

 

1. Always perform a thorough pre-trip inspection.

Before each trip, go through the checklist on your Driver’s Vehicle Inspection Report (DVIR). If you invest the time before heading out, you’ll catch many of the things that get you pulled over, reducing your chances of being pulled over and saving yourself time down the road.

When training new drivers, I make a point to ask what they think the minimum amount of time they should spend on a pre-trip inspection. It’s a trick question, because there isn’t a correct number. Instead, I tell our drivers to go on duty, then perform a thorough inspection, and log the time. Whatever time that takes is how much time it takes. It’s just part of the job.

 

2. Be prepared for a DOT inspection.

Get your paperwork together in a single folder so that it’s always available. Some documents to check and include are:

  • Your commercial driver license (CDL)
  • Medical Examiner’s Certificate
  • Record of Duty Status – Is it current?
  • Vehicle registration card – Is the license plate current and not expired?
  • Vehicle insurance documents – Current year expiration date?
  • Annual inspection stickers on tractor and trailer – Are they not expired?
  • Any applicable permits, including hazardous materials permits

 

3. Provide the officer whatever he or she requests.

Your job is not to ask why, but to comply. The sooner you deliver, the faster you’ll be back on the road.

 

4. Ask the officer to point out the violation.

Tell the officer you’d like to be able to address the violation properly. Take a picture and document it for repairs, if necessary.

 

5. Inspect your truck before getting back on the road after each stop.

Anytime you make a stop, things can change. You hit a pothole and your headlights can go out due to a broken filament. Signs pop loose. It’s good to take a quick walk around your truck for a visual inspection after every stop, just to make sure everything’s good to go.

Contact Lytx to learn more about our fleet safety and compliance management solutions.

 

About Len Marchlewski

Len is the director of safety for Equity Transportation Co., based in Walker, Michigan. Prior to joining Equity, he helped build a 24/7 compliance department for Martin Transportation Systems Inc., whose fleet of 1,500 trucks and 1,800 drivers across the U.S. and Canada generated more than 1,000 roadside inspections a year.

 

Related resources:

 

Previous
2020 DOT Hours of Service Exemptions: What You Need to Know
2020 DOT Hours of Service Exemptions: What You Need to Know

Learn about the most important DOT Hours of Service rules and exemptions, including proposed new exemptions...

Next
NFI Industries Delivers an Efficient, Safe Fleet Using Lytx Video Telematics
NFI Industries Delivers an Efficient, Safe Fleet Using Lytx Video Telematics

NFI Industries' Vice President of Safety and Loss Control discusses how video technology helps his fleet pr...

See all resources for trucking fleets

Keep browsing